To Next Page
S
Shannon SimonSep 12, 2025
Why does DoorKing 1812 Classic generate tone when granting access to a visitor, but will not work on regular phone line?
- UucruzSep 12, 2025
Try switching the wires on the PHON IN terminals.
Why does DoorKing 1812 Classic generate tone when granting access to a visitor, but will not work on regular phone line?
Try switching the wires on the PHON IN terminals.
What causes the electric strike locks on or gate operator to hold open on DoorKing 1812 Classic Intercom System?
This can be due to excessive voltage drop on the 24 VAC line. Another potential cause is the relay auto-activate time zone being enabled; turn it off or reprogram the time zone. Also, the entry code used might have been programmed under a hold location code; reprogram the entry code into a momentary activation location code.
Why won't my DoorKing 1812 Classic answer when called from the residents phone?
You might be using the wrong attention number. Try re-programming the attention number.
General installation, mounting options (surface, flush, wall), and site basics.
Instructions for telephone line, intercom, by-pass switch wiring, and terminal connections.
Overview of programming methods (keypad, PC, phone) and PC setup.
Details on general, time, dial-out, and entry code programming.
Adjusting volume, feedback, and master code switch.
Guest calls, call waiting, preprogrammed numbers, call forwarding, DND, entry codes.
Remote programming, relay activation, and switch input operations.
Cleaning, diagnosing, and resolving issues like noise.
Information on optional accessories and data logging tables.
General| Brand | DoorKing |
|---|---|
| Model | 1812 Classic |
| Category | Intercom System |
| Language | English |
