Maintenance Section
-137-
Overhead Guard – Inspect
1. Check tightness of overhead guard mounting bolts
at 95 N•m (70 lb•ft).
2. Check overhead guard for bent or cracked sections.
Have repairs made if needed.
Steer Suspension - Inspect
1. Inspect the suspension mounting bolts. Tighten
suspension mounting bolts, if necessary, to 240+
30
N•m (180+
20 lb•ft).
2. Look for leaks at the power steering hose
connections.
3. Remove any trash buildup on the suspension or the
steer axle.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
