Maintenance Section
145
Drive Axle Oil
NOTE : Failure to follow the recommendation will
cause shortened life due to excessive gear
wear.
• Shoe Brake
Select oil that meets below specifications.
z API GL-5
z MIL-L-2105 C, D
Gear Oil offers maximum protection against the
scoring and pitting of gear teeth and rolling element
bearings.
Gear Oil can also provide excellent stability under
high temperature conditions and has superior low
temperature performance. It will also give protection
against rust and corrosion.
• Oil Cooled Disc Brake (OCDB)
Select oil that meets below specifications.
: Universal Transmission Tractor Oil (UTTO)
The following UTTO products are authorized for use.
Supplier Product Name
TOTAL TRANSMISSION MP
MOBIL MOBIL FLUID 424
Brake Oil (Only for OCDB)
As brake oil for oil cooled disc brake system (OCDB),
use the oil that has the same specifications with
hydraulic oil.
The following commercial classifications can be
used in the brake system.
z ISO 6743/4 HM
z AFNOR NFE 48-603 HM
z DIN 51524 TEIL 2 H-LP
z HAGGLUNDS DENISON HFO-HF2
z CINCINNATI P68, 69, 70
Viscosity : ISO VG32
These oils should have antiwear, antifoam, antirust
and antioxidation additives for heavy duty use as
stated by the oil supplier. ISO viscosity grade of 32
would normally be selected.
The following products are authorized for use.
Supplier Product Name
TOTAL AZOLLA ZS
SHELL TELLUS
MOBIL DTE20S'
CALTEX RANDO HD
ESS NOTO H
CASTROL HYSPIN AWS
To Next Page
