Before Starting the Engine
Walk-Around Inspection
Make a thorough walk-around inspection before
mounting the lift truck or starting the engine. Look
for such items as loose bolts, debris buildup, oil or
coolant leaks. Check condition of tires, mast,
carriage, forks or attachments. Have repairs made
as needed and all debris removed.
Typical Example
1. Inspect the operator's compartment for loose
items and cleanliness.
2. Inspect the instrument panel for broken or
damaged indicator lights or gauges.
3. Test the horn and other safety devices for
proper operation.
Typical Example
4. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
5. Inspect the carriage, forks or attachments for
wear, damage and loose or missing bolts.
6. Inspect the tires and wheels for cuts, gouges,
foreign objects, inflation pressure and loose or
missing bolts.
7. Inspect the overhead guard for damage and
loose or missing mounting bolts.
8. Inspect the hydraulic system for leaks, worn
hoses or damaged lines.
9. Look for transmission and drive axle leaks on
the lift truck and on the ground.
Typical Example Diesel Engine(3 speed, Tier-Ⅱ)
Typical Example Diesel Engine(2 speed, Tier-Ⅱ)
Typical Example Diesel Engine(Tier-Ⅲ)
To Next Page
Loading...
