ENGINE DISASSEMBLY
- 47 -
3.1.37. Relief valve
Disassemble the relief valve.
3.1.38. Piston and connecting rod
Disassemble the pistons by two cylinders
while turning the crankshaft.
Unscrew the connecting rod fixing bolts and
take off the pistons and connecting rods in
the direction of piston.
Remove the piston pin snap rings, take off
the piston pin, then disconnect the
connecting rod from the piston.
Disassemble the piston rings using ring
pliers.
Use care not to interchange the
disassembled
parts and keep them in the
sequence of cylinder
No.
To Next Page
