EasyManua.ls Logo

Doosan DL06 - Page 189

Doosan DL06
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DL06K Interim Tire-4 Diesel Engine Maintenance of Major Components
187
3) Lubricating system
Care should be taken in dealing with oil quality and replacement timing of the oil
filter cartridge of the lubrication system.
Degradation of engine oil can have significantly adverse effects on the engine body
as well as the turbocharger.
The oils recommended for the engine mounted with the turbocharger are as follows :
Engine oil SAE no. API no.
Manufacture
Enterprise
DL06K
Genuine oil SAE 15W40
ACEA-E9
(API CJ-4)
Kixx DX Euro
Recommended oil SAE 15W40
ACEA-E9
(API CJ-4)
SK : ZIC XQ5000
Shell : Rimula super
* Recommended oil (Use the standard Doosan oil, if possible.)
5.3.6. Periodical servicing
Make it a rule to check the turbocharger assembly for condition and contamination
periodically.
1) Guide for checking the rotor for rotating condition
The inspection of the rotor assembly for rotating condition should be performed by the
degree of unusual sound. If a sound detecting bar is used, install its tip on the
turbocharger housing and increase the engine revolutions slowly. If a high-pitch sound
is heard continuously, it means that the rotor assembly is not normal. In this case, as
the metal bearing and rotor are likely to be in abnormal conditions, the turbocharger
should be replaced or repaired.
2) Guide for checking rotor end play
Disassemble the turbocharger from the engine, then check the rotor axial play and
radial play. When disassembling the turbocharger, be sure to plug the oil inlet and
outlet ports with taps, etc