EasyManua.ls Logo

Doosan DL06 - Page 53

Doosan DL06
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DL06K Interim Tire-4 Diesel Engine Technical Information
51
Condition Causes Remedies
5) Engine noisy For noises arise compositely such as
rotating parts, lapping parts etc.,
there is necessity to search the
cause of noises accurately.
(1) Crankshaft As the wear of bearing or crankshaft
progress, the oil clearances increase
Replace bearing & grind
crankshaft
Lopsided wear of crankshaft Grind or replace
Oil supply insufficient due to oil
passage clogging
Clean oil passage
Stuck bearing Replace bearing & grind
(2) Connecting-rod and
connecting-rod
bearing
Lopsided wear of con rod bearing Replace bearing
Lopsided wear of crank pin Grind crankshaft
Connecting rod distortion Repair or replace
Stuck bearing Replace & grind crankshaft
Oil supply insufficiency as clogging
at oil passage progresses
Clean oil passage
(3) Piston, piston pin &
piston ring
Piston clearance increase as the
wear of piston and piston ring
progresses
Replace piston &
piston ring
Wear of piston or piston pin Replace
Piston stuck Replace piston
Piston insertion poor Replace piston
Piston ring damaged Replace piston
(4) Others Wear of crankshaft, thrust bearing Replace thrust bearing
Camshaft end play increased Replace thrust plate
Idle gear end play increased Replace thrust washer
Timing gear backlash excessive Repair or replace
Valve clearance excessive Adjust valve clearance
Abnormal wear of tappet, cam Replace tappet, cam
Turbocharger inner part damaged Repair or replace
6) Fuel consumption excessive Injection timing incorrect Check
Fuel injection amount excessive Adjust

Other manuals for Doosan DL06

Related product manuals