Doosan DL160 - Steering Wheel; Kick-down Switch (Two places)

OP000754Operating Controls
2-10
7. Steering Wheel
Rotating steering wheel controls position of front wheels
and this determines direction of machine travel.
8. Kick-down Switch (Two places)
When transmission is in 2nd gear, pressing this switch will
shift transmission into 1st gear. This will allow the driver to
perform a quick digging movement.
NOTE: Kick-down is "RELEASED" when transmission
is placed in "NEUTRAL" position or the switch is
pressed again.
Kick-down function range:
• Automatic: 2nd, 3rd, 4th.
• Manual: 2nd.
A second kick-down switch (Figure 15) is located on the
right button in the tip of the pilot control valve lever
(joystick).
FG003939
Figure 13
Figure 14
AHO0900L
FG013048
Figure 15