10. Cylinder block/head
162
5. Camshaft bearing replacement
Replace the camshaft bearing with a special tool.
EDP2218003
6. Camshaft run-out
With placing the camshaft on the 2 ea of V-blocks, and
inspect the run-out of the camshaft, adjust or replace the
severe one.
EDP2218004
Check of camshaft
1. Camshaft bearing outer diameter: Using an outer diam-
eter micrometer, measure the outer diameter of the
camshaft bearing.
DV2213133A
2. Camshaft bearing inner diameter of cylinder block: Using
a cylinder inner gauge, measure the inner diameter of the
camshaft bearing.
DV2213134A_E
3. Clearance between camshaft and bearing: Compare the
inner diameter of the camshaft bearing with the outer
diameter value of the camshaft to determine the clear-
ance. If the reading exceeds the tolerance limit, replace
the camshaft bearing.
Standard Limit
0.05mm 0.15mm
Item Standard
Camshaft bearing outer
diameter
Ø69.91 ~ Ø69.94mm
Item Standard
Camshaft bearing inner
diameter of cylinder block
Ø70.077 ~Ø70.061mm
To Next Page
Loading...
