3. Performance and specifications
26
Lubrication method Fully forced pressure feed type
Oil pump
Type Gear type
Driving type Driven by crankshaft gear
Oil filter Full flow Cartridge type
Oil capacity
(L)
Max. 40
Min. 27
Lubrication oil
pressure
(kPa)
Idle speed Min. 100
Governed
speed
Min. 250
Max. oil temperature (°C)
120
Oil specifica-
tion
Oil class CI-4 or higher
SAE 10W/40
Fuel System
Injection pump Bosch in-line "P" type
Governor Electric type
Fuel feed
pump
Type Mechanical type injection pump
Capacity
(L/hr)
630
Injection noz-
zle
Type Multi hole type
Opening
pressure
(MPa)
28
Fuel filter Full flow, Cartridge type with water drain valve
Fuel Used Diesel fuel oil
Intake/Exhaust System
Max. back pressure (kPa) 5.9
Max. intake
air restriction
(kPa)
With clean fil-
ter element
2.16
With dirty fil-
ter element
6.23
Cylinder block/head
Valve system type Overhead valve type
No. of valve
(per cylinder)
Intake 1
Exhaust 1
Item
DP222L
Remarks
DP222LAS DP222LBS DP222LBF DP222LCS DP222LCF
To Next Page
Loading...
