Doosan P158LE -III User Manual

Engine Disassembly
- 58 -
3.1.23. Cylinder head
z Loosen the cylinder head fixing bolts in
the reverse order of assembling, and
remove them all and then take the
cylinder head out.
z Remove the cylinder head gasket and
scrap it.
z Eliminate the residue from the cylinder
head face and cylinder block face.
NOTE :
Be careful not to damage the
cylinder head face where its gasket
contacts.
3.1.24. Oil pan
z Remove the oil pan fixing bolts and
separate the pan.
z Remove the oil pan gasket and scrap it.
3.1.25. Oil pump
z Remove the oil suction pipe fixing bolts
and tear them down.
z Remove the oil relief valve fixing bolts
and take them out.
z Remove the oil pump fixing bolts and
separate it.
EFM2023I
EFM2024I
EFM2025I

Doosan P158LE -III Specifications

General

Engine Model	Doosan P158LE -III
Number of Cylinders	4
Compression Ratio	17.5 : 1
Cooling System	Water-cooled
Fuel System	Common rail
Aspiration	Turbocharged
Lubrication System	Forced lubrication
Engine Type	4-cycle, water-cooled, diesel engine