To Next PageTo Next PageHow to extend the air filter life on my Doosan Air Compressor?
To extend the air filter life of your Doosan Air Compressor, move the compressor to a cleaner environment. Ensure the correct air filter elements are installed. If you are cleaning the filter, consider installing new air filter element(s) instead. Also, comply with the correct stopping procedure as outlined in the manual.
What causes excessive oil carryover in a Doosan P425WCU-EX-T2?
If there's excessive carryover (compressor oil in the compressed air) in your Doosan Air Compressor, check the separator scavenge line, drop tube, and orifice, cleaning or replacing parts as needed. Consider replacing the separator element if it's deteriorated. Also, check the minimum pressure valve, repairing or replacing it if necessary, as low separator tank pressure can contribute to this issue.
General| Brand | Doosan |
|---|---|
| Model | P425WCU-EX-T2 |
| Category | Air Compressor |
| Language | English |
Proprietary nature of manual, warranty, scope, approved components, and intended uses of the compressor.
General safety warnings, operating conditions, fastener checks, and avoiding hazardous substances.
Dangers of mishandling compressed air, pressure relief, breathing apparatus use, and hose safety.
Hazards from hot exhaust, flammable materials, and potential hazardous substances used in the compressor.
Hazards from battery acid and potential explosion, with precautions for handling.
Hazards from hot radiator coolant and steam, with precautions for handling.
Safe loading, towing procedures, and checks for transporting the compressor.
Explanation of safety decals (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Specifications for compressor models, engine details, fluid capacities, temperature ranges, and weight measurements.
List of service parts with their corresponding part numbers for maintenance and replacement.
Identifies and describes the functions of the control panel components like gauges and switches.
Explains how to navigate and view engine and compressor parameters displayed on the unit.
Procedures for responding to and acknowledging system faults and alerts displayed on the unit.
How to view, acknowledge, and reset service intervals indicated by the system.
Options for adjusting display intensity, contrast, and viewing mode for optimal visibility.
Procedures for managing compressor ID and accessing software version details and revision history.
How to set the display language and measurement units (English/Metric).
Steps for safe towing, setting up the unit on site, and preparing it for starting.
Detailed steps for safely starting the engine and compressor, and for shutting down the unit.
Instructions for adjusting the pressure regulator settings for optimal compressor performance.
Guidance on selecting the correct compressor oil based on operating pressure and ambient temperature.
Importance of maintenance, safety during tasks, and general cleaning for optimal operation.
Key maintenance tasks including oil level checks and air cleaner servicing at scheduled intervals.
Inspection of gauges, fuel, battery, tires, and fasteners for proper condition and tightness.
Inspection and maintenance procedures for the radiator and hoses to ensure system integrity.
Procedures for replacing compressor oil filters and cleaning the oil cooler for efficient operation.
Maintenance for the receiver separator, including oil draining and element replacement as per schedule.
Maintenance of the scavenge line and care instructions for the exterior paint finish.
Instructions for applying or replacing decals on the compressor enclosure to ensure safety compliance.
Guidelines on approaching troubleshooting, identifying problems, and finding root causes.
A chart listing common compressor complaints, their causes, and suggested corrections for quick resolution.
Explanation of diagnostic codes displayed by the compressor and engine for error identification and resolution.
A log of revisions made to the manual, indicating changes and updates over time.
