Dorma EM Series - User Manual

Verrouillages EM
Montage encastré
Sous réserve de modifications
Fichier: pose_vent_encastre_0504_page 1 / 2
DORMA France S.A.S . Europarc . 94046 Créteil . Tél: 01.41.94.24.00
F
GB
DORMA
EM 1800 AM
EM 3000 M
EM 3000 AM
Installation type sur une porte en aluminium
Typical installation for aluminium door
2 x ø
5,
5
2 x ø5
,
5
2 x
ø
8,5
2
x
ø1
2
,
5
K
D
E
C
B
A
J
H
I
L
Unit: mm
EM 1800 xx
EM 3000 xx
35,0
A B C D E H
180,5 207,6 19 22,0 136
I J K
33
L
27,5 28 8,5
39,5 228,5 247,6 19 26,5 187 39 30,4 28 11,0
F
GB
Note importante
Important notice
1. La tension d'alimentation doit être suffisante.
Voir la notice de raccordement
2. L'alimentation doit fournir un courant suffisant
3. Ne jamais percer ni modifier le verrouillage EM
ni la contre plaque
1. The power supply has to be enough for the
electromagnet. Look at wiring notice
2. The supply should be able to provide a
sufficient voltage
3. The armature plate and the electromagnet
should no be drilled or modified

Summary

Important Notes for EM Lock Installation

Power Supply and Modification Guidelines

Ensure sufficient power supply and voltage. Do not drill or modify the EM lock or strike plate.

Aluminum Door Installation Type

Wooden Door Installation Type

Armature Plate Mounting on Doors

Mounting Armature Plate Flexibility

Mount armature plate as shown. Do not overtighten the central screw for flexibility.

Dorma EM Series Specifications

General

Category	Electromagnetic Lock
Operating temperature	-10°C to +55°C
Operating voltage	12V DC or 24V DC
Communication	No
RFID Technology	No
Voltage	12V DC or 24V DC
Mounting	Surface