English
1. Press and hold Settings Network & Internet
Location.
2. Enable the switch to enable location positioning.
Select mode:
• High accuracy: for best location accuracy. This uses every service
available: GPS, Wi-Fi, Bluetooth, and/or mobile networks in what-
ever combination available. This is quite battery consuming.
• Battery saving: to reduce battery consumption by disabling GPS.
This mode uses less battery-intensive location sources (Wi-Fi,
Bluetooth, and/or nearby mobile) to figure out where you are us-
ing location services. This will not be as accurate as using GPS.
• Device only: this mode relies solely on the GPS. This means it will
work in places where you won't find enough Wi-Fi, cellular tow-
ers, and Bluetooth beacons to get a proper location.
3. It’s also possible to enable/disable what app/function should be given
permission to location information. Press App-level permissions and
enable the switch to enable location positioning for each app/
function.
SIM card lock
1. Press and hold Settings Security & location SIM
card lock select SIM card (if applicable).
• Set the switch to activate the PIN code. You need to enter
the PIN code every time the phone is started.
• Set the switch to deactivate the PIN code.
IMPORTANT!
If you deactivate the PIN code and the SIM card is lost or stolen,
it is unprotected and must be blocked by your service provider.
2. Press Change SIM PIN to change you SIM PIN code.
3. Enter the old PIN and press OK.
4. Enter new PIN and tap OK. Enter new PIN again and select OK once
more. When done, SIM PIN changed successfully will appear.
Start-up Wizard
You can run the start-up wizard anytime you want.
43
To Next Page
Loading...
