English
Standby (idle mode)
When the phone is ready to use, and you have not keyed in any characters,
the phone is in standby.
• Press to return to standby mode.
• Press the options button to access the notices, if there’s any.
Tip: You can always press to return to standby.
Volume keys + / –
• During a call the volume keys adjusts the call volume.
See also Volume , p.36 for more information.
Note! If you use a hearing aid or have hearing difficulties when using the
telephone in a noisy environment, you can adjust the phone's audio
settings, see Audio setup , p.37.
To enable and disable features and functions
enabled functions.
disabled functions.
Headset
When a headset is connected, the internal microphone in the phone is au-
tomatically disconnected. If available, use the answer key on the headset
to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
Enter characters
The phone has a simplified keypad so you can make calls with just one
push of a button, but since there is so few buttons it requires a slightly dif-
ferent method to enter characters.
If you are in a place where you want and have the opportunity to enter
characters:
10
To Next Page
Loading...
