English
Note! To save power, the screen is locked after a while. Press the Power
button to activate the screen, see Lock screen, p.11
If the battery is completely discharged, the device cannot be turned on
immediately when the charger is connected. Allow a depleted battery to
charge for a few minutes before turning on the device.
Turn on the phone
Note! When turning on your phone, the installed applications may need to
be updated. Application updates requires Internet connection and can take
a few minutes. A Wi-Fi connection is preferable. The phone may appear a
bit slow during the update.
• Once you've fully charged the device, turn it on by pressing and hold-
ing the Power button. Keep it pressed until the phone vibrates and
the display lights up.
• Enter your SIM card PIN if requested, then press OK. Tap to erase.
• Wait for the phone to start.
If the wrong PIN code is entered several times Enter PUK is displayed and
you need to enter your PUK code (Personal Unblocking Key). Contact your
service provider for more information about PIN and PUK code. See
Change the SIM PIN code, p.44 for information about changing the PIN
code.
To turn off the phone
• Press and hold the Power button until the options menu opens.
• In the options menu, tap Power off.
6
To Next Page
Loading...
