English
3. Select the unit that you want to connect to.
4. Tap Pair to connect. You may be asked to input a password or to
press a button. If prompted, input the password or otherwise ac-
knowledge the connection on your phone or the other device.
5. After you acknowledge the password (or not), the units are connected
and communicating. You can begin using the device.
6. If you need more settings for the unit, tap Previously connected
devices.
7. Tap next to the device name.
Note! Because the devices are now paired, when you turn on Bluetooth on
your device and the other device is on, the connection reestablishes and
they'll stay paired until you unpair them.
Unpair devices
1. From the Home screen, tap Set My other connections
The Bluetooth connection.
2. Tap Previously connected devices.
3. Tap next to the device name that you want to unpair.
4. Tap Forget.
Note! To disconnect you can turn off the other unit or disable Bluetooth on
that device.
Aeroplane mode
In Aeroplane mode you can’t make or receive calls, surf the web or down-
load emails, or do anything that requires an Internet connection, this is to
prevent disturbance to sensitive equipment. You can still play games, listen
to music, watch videos and other content, as long as all this content is
saved on your memory card or internal storage.
When you take your phone abroad, you can keep it in flight mode. If you
do that, there’s no chance of data roaming charges, and you can still ena-
ble Wi-Fi. Enable Aeroplane mode when in areas with no network cover-
age to save battery since the phone repeatedly scans for available
networks and this consumes power. You can be notified by alarms, if
alarms are activated.
37
To Next Page
Loading...
