Doro L30 - Remove the Lower Housing Assembly; Remove the Pcba; Disassemble the Pcba Module

Doro L30 Disassembly&Assembly procedure
6/17
3.4 Remove the lower housing assembly
3.5 Remove the PCBA
3.6 Disassemble the PCBA module
Remove the lower housing from the upper housing assembly by plastic card and please start from the
bottom of the product and then along the sides to open the lower housing assembly carefully.
Disconnect LINK FPC with the PCBA, remove the PCBA by forceps.
Remove SOS FPC and SOS holder from PCBA by forceps.