14
Volume control
Use the side buttons +/– to adjust the sound volume
during a call. The volume level is indicated on the display.
In standby or during an incoming call, set the ringtone
volume using the +/- buttons.
The last used settings will be saved.
Entering text
By repeatedly pressing the number buttons to select cha-
racters, you can enter texts. Press the respective button
repeatedly until the desired character is displayed. Wait
until the blue background of the current character disappe-
ars before you enter the next character.
By pressing the * button, a list of special characters is
displayed. Select the desired character by pressing
or * and # to navigate to the left or right and
press OK to accept.
Use the buttons to move the cursor within the
text.
With #, you can switch between capital and lower case
letters and numbers. The symbol on the top left of the dis-
play shows the input mode:
To Next Page
