Page 10
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 6: Then, carefully lift the retainer from the seal. You are
checking to see if there is anything lodged or stuck.
NOTE: To inspect the check valve, carefully lift the cone
from the retainer.
Step 5: Look at the bottom side of the cone.
Step 4: It usually comes out in two pieces. Set the unit aside.
D14MZ3000 Troubleshooting - Part 2
To Next Page
Loading...
