Page 16
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
D14MZ3000 Troubleshooting - Part 3
Step 7: To test the lower ange, position the needle nose pliers
near the top of the plunger.
Step 8: Then, twist it a quarter turn counter clockwise to remove.
Step 9: Insert the piston into the body. It too should be a snug t. If
either is loose, the anges need to be replaced.
To Next Page
Loading...
