dosatron D25F - Thread Suction Hose Nut; Slide Hose onto Barb; Hand Tighten Hose Nut

Page 9
D25F Troubleshooting - Part 2
Step 11: Slide it onto the barb.
Step 12: Hand tighten the nut. This should stop the water from
dripping back into the stock tank.
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 10: Thread the suction hose nut onto the hose.