Double Power Electronics DP-8120VB - Page 19

User Manual
19
IR
1.Remove it and continue the counting
2.If it is often displayed, adjust CIS IR transmission light
3.Lower the sensitivity level.
UV
1.Remove it and continue the counting
2.If it is often displayed, adjust UV sensor
3. Replace UV sensor
FL
Remove it and continue the counting.
IMAGE
IMAGE1
IMAGE2
IMAGE3
IMAGE4
IMAGE5
IMAGE6
IMAGE7
DOG EAR
1.Remove it and continue the counting
2.If it is often displayed, adjustment of CIS white radiation
3.Replace CIS sensor
TOP COVER OPEN!
Lock of the top cover well
BACK DRAWER OPEN!
It may be some banknotes are jammed,remove the banknote, then
installation of the back drawer
JAM
Some foreign substance falls inside the machine or notes are blocked, open
the back cover to remove them.
QUE
Adjust the adjusting screw to adjust feeding clearance.
SN Repeat
Remove it and continue the counting.
SN Invalid
Reject Pocket Full
Remove the banknotes on the reject pocket.
Stacking Pocket Full
Remove the banknotes on the stacker.
COUNT
Put the banknotes on the banknote stacker back to the banknote
hopper to count again
Old Ver
Remove it and continue the counting.
VER DIFF
TIME2
Put the banknotes on the banknote stacker back to the banknote
hopper to count again
FACE DIFF
Remove it and continue the counting.
ORIENT DIF
Remove it and continue the counting.