Regular Maintenance Instruction
■ If the temperature is lower than 20℃, please turn on the machine and wait for 3 minutes
before counting.
■ The machine shall be operated at places with good ventilation and kept away from strong
sunshine and strong magnetic field.
■ The power plug of the machine shall be inserted to electrical socket with safety grounded.
■ The power supply of the machine shall be within the range of 100~240V AC. Otherwise it will
affect the machine’s normal operation.
■ Banknote twiddling wheel, contra rotating wheel, and delivering wheel can’t be stained with
any grease, otherwise it will slide and the counting will be inaccurate.
■ Dusts on CIS image detecting module, IR sensors, and magnetic sensor shall be thoroughly
cleaned once a week at least. You may clean the machine by using the provided brush to
remove any dust build-up on the exposed portions of the machine.
NOTE: Do not use any chemicals to clean this machine.
How to replace the fuse
The fuse can be replaced if it is burned-out, open the cover of fuse holder and insert a new
one, and then recover it.
Note: For continued protection against risk of fire, replace only with same type and rating of fuse.
To Next Page
Loading...