Dover markem-imaje 2200 - Page 26

Instruction manual 26
Technical specications
■ Communication interface
High-speed RS232 300–115,200 bps
10/100 Fast Ethernet, The following protocols are supported: TELNET,
FTP, HTTP, LPD (Line Printer Daemon) and RAW
TCP
RAW TCP printing used for transparent communication between a client and
a print device. The TCP port is 9100 by default. RAW TCP is the default print
protocol for most print devices.
Web server
I/O signals: 2 x In via opto, 5 x Out via relay (24 VDC)
May be controlled via an external emergency shutdown circuit
Barcode reader input
- Air consumption
Air supply min. 6 bar, max. 9 bar, ltered and dry
Air consumption max 23-85 l/min., depending on the applicator
model used and the application speed.
6 labels per
minute
25 labels per
minute
50 labels per
minute
120 labels per
minute
Blow X 25 35 85
Wipe X 40 50 60
Small tamp X 45 55 70
Large tamp X 50 65 X
Pallet 23 X X X
Average air consumption (l/min.) with air jet at 50%