Dover markem-imaje 2200 - Troubleshooting

Instruction manual 22
Troubleshooting
Alarm condition.
Acknowledge alarm
(if error/warning
corrected)
Information message Meaning
01 - Ready The system is ready and the trigger is enabled (on-line).
02 - Available
Send through a label to be printed to make the system
ready (online).
03 - Paused
Press the Start button to make the system enters Ready
mode.
System Stopped The system is stopped.
System update Wait for the update to nish.
Press the Start button Press the Start button to make the system ready.
System Info Restart the printer to place the system ofine.
Test pattern Restart the printer to place the system ofine.
Hex Dump Restart the printer to place the system ofine.
MPS auto adjustment Restart the printer to place the system ofine.