Dover OPW SiteSentinel Integra 500 - User Manual

Document Number: M1800, Revision 7
Issue Date: 1/15/2020
Supersedes: 5/17/2016
Central Technical Support Number: 1-877-OPW-TECH (877-679-8324)
Calls outside US and Canada: 1-708-485-4200 Fax: 1 (800) 421-3297
Hours: Monday through Friday, 7:00 am to 6:00 pm, US CST
www.opwglobal.com
SiteSentinel
®
Integra 100™/500™
Automatic Tank Gauge System
Installation Manual

Dover OPW SiteSentinel Integra 500 Specifications

General

Category	Industrial Equipment
Model	SiteSentinel Integra 500
Number of Probes Supported	16
Manufacturer	Dover OPW
Application	Fuel management
Power Supply	100-240 VAC, 50/60 Hz
Display	7-inch color touchscreen
Communication Protocols	RS-232, RS-485, Ethernet
Protocols	Modbus TCP
Operating Temperature	0°C to 50°C
Approvals	UL, cUL, ATEX

Summary

1 Applicable Warnings and Cautions

1.1 Technician Certifications

Ensures intrinsically safe device requirements are met for proper installation.

1.1.1 Installer Safety

Adherence to electrical codes and local regulations for safe installation.

2 SiteSentinel Integra ATG Console

2.2 Console Specifications

Technical specifications for the SiteSentinel Integra console.

2.3 Console Installation

Instructions for mounting the console securely indoors.

2.4 Console Wiring

Power wiring and communication connections for the console.

2.4.1 Petro-Net Wiring

Wired RS-485 connections for communication between VSmart, OM4, and console.

2.7 Field Wiring Diagram for Integra 100

Wiring diagram for the Integra 100 console.

2.8 Field Wiring Diagram for Integra 500

Wiring diagram for the Integra 500 console.

2.9 Main Board DIP-Switch Configuration

Location and setting of main board DIP-switches for configuration.

4 VSmart Module

4.1 VSmart Specifications

Technical specifications for the VSmart module.

4.2 VSmart Module Installation

4.3 External VSmart Module Wiring

Wiring instructions for the external VSmart module.

4.3.1 VSmart Addressing

5 Line Interface Module LIM

5.1 LIM Specifications

Technical specifications for the Line Interface Module (LIM).

5.2 LIM Installation

5.3 LIM Wiring

Wiring instructions for the LIM module.

5.3.5 LIM Addressing

6 OM4 Module

6.1 Cautions!

Important safety precautions for the OM4 Output Module.

6.2 OM4 Specifications

Technical specifications for the OM4 Output Module.

6.3 OM4 Wiring

Wiring instructions for the OM4 module.

6.4 OM4 Addressing

7 Tank Alert (Overfill Alarm)

8 Tank & Pre-Installation Preparation

8.1 Waterproof Electrical Connections

Instructions for creating waterproof electrical connections using epoxy.

8.2 Probe-Cable Seal-Offs

8.3 Probe Placement

Guidelines for ideal location of probes within the tank.

8.4 Probe Installation in Underground Storage Tanks

Steps for installing probes in underground storage tanks.

9 Rigid Probe Installation

9.4 Rigid Probe Specification

9.5.1 Model 924 B Specifications

Detailed specifications for the Model 924B probe.

10 Flex Probe Installation

10.1 Model 7100 V Flex Probe

10.2 Model 7100 V Flex Probe Specifications

Technical specifications for the Model 7100V Flex Probe.

10.3 Flex Probe Installation

Procedure for installing the flex probe, including length determination.

10.3.1 Flex Probe Length Determination

Steps to determine the correct flex probe length for the tank.

10.3.4 Flex Probe Wiring

Wiring procedures for the flex probe.

10.3.5 Installing the Flex Probe

Step-by-step guide for physically installing the flex probe.

10.3.6 Finishing the Flex Probe Installation

11 Model 327 VLLD Sensor

11.1 VLLD Specifications

Technical specifications for the VLLD sensor.

11.2 Prior to Installation

11.3 VLLD Installation

Step-by-step instructions for installing the VLLD sensor.

11.4 VLLD Wiring

Wiring instructions for the VLLD sensor.

12 Sensor Technology Overview

12.2 IntelliSense Technology

12.4 Interstitial Sensor

Appendix A: OPW Smart Sensors

Interstitial Level Sensor Float Switch

Liquid-Only Float Sensor

Discriminating Dispenser Pan Sensor

Discriminating STP Sump Sensor

Discriminating Interstitial Sensor

Interstitial Hydrocarbon Liquid Sensor with Water Indicator

Hydrocarbon Liquid Sensor with Water Indicator

Dual-Float Dispenser Sump Sensor

Dual-Float STP Sump Sensor

Dual-Float Brine Sensor (D-10)

Dual-Float Brine Sensor (D-20 B)

Universal Reservoir Sensor

Density Measurement Sensor (DMS)

DMS Installation

Appendix B: Existing OPW;EECO Equipment

Appendix C: Smart Module

Appendix E: Model 924 B Probe Part Numbers

Appendix J: Flex Probe Specifications

Appendix L: Non-Smart Sensors

Hydrocarbon Liquid;Water Sensor

Hydrocarbon Vapor Sensor

Combo Single-Level; Hydrocarbon Liquid Sump Sensor

Combo Dual-Level;Hydrocarbon Liquid Sump Sensor

Single-Level Sump Sensor

Dual-Level Reservoir Sensor

Hydrocarbon Liquid Sump Sensor

Interstitial Optical Liquid Sensor