Dover ProGauge MagLink LX4 User Manual

6. Set the IP address. The unit comes shipped from the factory with the IP address 10.90.10.92. Your
laptop must be set one number higher or one number lower to connect to the console.
a. Click the button next to Use the following IP address.
b. Enter the IP address: 10.90.10.92.
c. Enter the Subnet mask: 255.255.255.0.
7. Click OK.
Your laptop is now set up to communicate directly with your MagLink LX4 console. Enter the IP address into
your browser to connect.
M2051-EU Rev.: 1 Dover Fueling Solutions
Page 14

Dover ProGauge MagLink LX4 Specifications

General

Brand	Dover
Model	ProGauge MagLink LX4
Category	Measuring Instruments
Language	English