AEF-A.DOC 11/2011
3
CHAPTER 1
CAUTION
READ ALL INSTRUCTIONS
The spiral mixers are manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.
A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.
Drawings, electrical diagram and replacement parts numbers are included in this manual.
ATTENTION
DOYON is not responsible for damages to the property or the equipment
caused by personnel who is not certified by known organisations.
SHIPPING
For your safety, this equipment has been verified by qualified technicians and carefully crated
before shipment. The freight company assumes full responsibility concerning the delivery in good
condition of the equipment in accepting to transport it.
IMPORTANT
RECEPTION OF THE MERCHANDISE
Take care to verify that the received equipment is not damaged before signing the delivery receipt.
If a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier
has left, contact immediately the freight company in order that they do their inspection.
We do not assume the responsibility for damages or losses that may occur during transportation.
INSTALLATION WARNINGS
CAUTION
To ensure continued protection against risk or electric shock,
connect to properly earthed outlets only.
INSTALLATION AND SERVICE
The spiral mixer must be connected to the utility and electrically grounded in conformity to the
effective local regulations. If these are not established, the machine must be connected according
to the National Electrical Code (NFPA 70-XX). This equipment has a male plug that meets
those requirements.
To Next Page
Loading...
Need help?
General
