A7
MIXER CLEANING AND MAINTENANCE
LUBRICATION
The motor has grease-packed ball bearings and requires little attention. The transmission gearing
is packed with special grease that will last for several years. When grease is needed for
replacement, it should be ordered from our factory.
The bowl lift are to be cleaned and lubricated with vegetable grease.
CLEANING
We recommend cleaning the mixer and agitators every time you finish the production.
G:\ACAD10\MELANGE\SM300\SM300.dft
TO CLEAN ONCE PER WEEK
1- Remove (scrape OFF) the
floor residue from the
bowl guide.
2- If needed, clean the bowl
guide with water and soap.
Then, dry (wipe OFF) the
guide while raising and
lowering the bowl.
3- Apply a light film o
vegetable grease.
To Next Page
Loading...
Need help?
General
