A5
I N S T A L L A T I O N
IN GENERAL
Open the crate and remove all materials used for packing as well as the accessories.
Put the mixer on a straight floor and make sure the mixer is level.
For a optimal stability and security use the hole on each leg to fix the mixer on the floor or the table
Each unit is set up to be used with the electrical supply specified on the nameplate fixed on the side
of the mixer.
To the electrician
The electrical supply installation must be in accordance with the electrical rating on the nameplate.
PLANETARY DOUGH MIXER OPERATION
1. Put your dough recipe in the bowl.
2. Put the bowl in place on the mixer.
3. Install the proper agitators.
4. Pull up the lift bowl handle.
5. Close the bowl guard.
6. Set the proper speed.
7. Pull the stop switch.
8. Push the start switch to start the mixer.
9. To change speed, turn the motor off. Allow the planetary to stop rotating, move speed
selector handle at the desired speed and restart the mixer. If you can not change the speed, put
the speed selector handle at neutral position (between two speeds), start and stop the mixer
and change speed before the mixer is almost stop.
10. NEVER CHANGE THE SPEED WHEN THE MIXER WORKS.
11. IF YOU OPEN THE BOWL GUARD OR PUSH DOWN THE BOWL, THE MIXER
WILL AUTOMATICALLY STOP.
WARNING
NEVER TRY TO PUT YOUR HAND IN THE BOWL WHEN THE MIXER IS ON.
ALWAYS DISCONNECT THE ELECTRICAL CORD OR MAIN POWER BRAKER.
POWER FAILURE
With security bowl guard .When you have a power failure you don’t have to switch off the mixer. It
will not start working when the power comes back on.
Without security bowl guard. When the power comes back on, the mixer will start automatically if it
was on before the power failure. It is necessary to put the switch to « OFF » so that the mixer does
not start without supervision.
To Next Page
Loading...
Need help?
General
