The Big Lebowski Pinball | Operaons Manual GAME SETUP INSTRUCTION
12
GAME SETUP INSTRUCTION
UNBOXING THE BIG LEBOWSKI™ PINBALL
Safety regulations
Please make sure you set up the game with at least 2 persons. A pinball machine is an extremely heavy
machine and not setting it up correctly may result in injuries.
Tools needed
Wire cutters or scissors
Bubble level
5/8” wrench, or 16 (metric) wrench
Utility knife
Box contents
After opening the box, check if all parts listed below are in the box. These can all be obtained after the
box has been opened at the top.
4 Pinball legs
4 Pinball Leg levelers with tightening nuts
8 Leg bolts
The ‘Rug’ (rolled up)
3 Plastics for key chain
6Steelpinballs(5fortheplayeld,and1fortheBowlingAlley)
1 Line power cable (based on your country)
2Butterybolts
2 keys for backbox
2 keys for coin door
1 Plumb Bob (for the tilt mechanism)
Envelope contents
The envelope in the box contains:
Letter with information about software updates and support.
2 Score cards