DP THE BIG LEBOWSKI - Bowling Opto Test

The Big Lebowski Pinball | Operaons Manual MAIN FUNCTION
39
BOWLING OPTO TEST
This tests if the switches in the Bowling alley are working properly. It will show if there is a “Ball at Top”
or “Ball at Bottom” and the word OPTO will light up if the ball crosses the OPTO beam. It will start with
Ball at bottom. If you push Enter now, the coil will be activated which will re the ball up. Status will
now be Ball at Top. If you push Enter again, the ball will be released and will roll down over the bowling
playeld. You should see OPTO appear briey on the display.
Remember that for the coils to work in the Test Menu, the switch which enables power supply to the 12
& 48 VDC circuits must be enabled!