DP THE BIG LEBOWSKI - Solenoid Test

The Big Lebowski Pinball | Operaons Manual MAIN FUNCTION
32
SOLENOID TEST
If you activate this test, it will show you rst which coils (solenoids) are available for testing.
Important notice: the stepper motors are operated at 12VDC and coils are operated at 48VDC. With an
open coin door, these voltages are disabled so the coils and stepper motors will NOT work. You have to
pull the pin of the white interlock switch located on a bracket at the left side of the coin door to supply
the desired voltage to the playeld and to be able to test the coils and stepper motors.
With the + - buttons, you can select the coil you want to test.
If you select Flippers you will get the choice which ipper you want to test.