DP THE BIG LEBOWSKI - Coil Strengths

The Big Lebowski Pinball | Operaons Manual MAIN FUNCTION
50
COIL STRENGTHS
Here, you can set the strength of each coil independently.
Select the coil you want to change with the + - buttons and increase power (longer time) or decrease
power (shorter time) to get the desired strength.
Typically,thesevaluesdonothavetobeadjusted.Whenyoufeeltheneedtoadjustthem,make
sureyouarenotincreasingthestrengthtoovercomeamechanicalissue.Thesolutionisthentox
the mechanical issue, not to increase the strength.
As an example, we look at the settings for the ippers.

 LeftFlipper:30ms.Thisspeciesthetimethepowercoilwillturnonwhenitips. 
  After30mstheholdcoilwilltakeover.

The standard setting for Flipper hold (is the hold coil) is Strong. This means hold coil gets
full and continuous power. If you experience weaker hold coils after intensive long games
you can try Normal setting as this heats the coils less.
The same principle is applicable to the other coils.