DR 16.5 - Page 9

CONTACT US AT www.DRpower.com 9
Chapter 2: Setting Up the DR SELF-FEEDING CHIPPER
This chapter outlines assembly and a few simple steps you will need to follow to set up your new machine before you use it. It may
be helpful to familiarize yourself with the controls and features of your DR SELF-FEEDING CHIPPER as shown in Figure 1 before
beginning these procedures. If you have any questions at all, please feel free to contact us at www.DRpower.com or call our
Customer Service Representatives at our toll free number: 1-800-DR-OWNER (376-9637).
DR SELF-FEEDING CHIPPER Controls and Features
Key
Switch
Oil Drain
Discharge
Chute
Figure 1
Blow Back
Shield
A
ccess Cove
r
f
or Chipper
Knife Check
Belt Guard
Choke Lever
Fuel Fill
Cap
Belt
Tensioner
Tongue
A
ssembly
Wheel
A
ssembly
Fuel
Shut-off
Throttle
Lever
On/Off Key
Switch
Starter
Cord
Hopper
A
ssembly
Battery
Chipper Knife
Wear Plate
Oil Fill/Dipstick
Fuel Fill Cap
Pro Engine
Oil Drain
Plu
g
Hopper Removed
21.0 Yard-Tow
Model Shown