DR XD30 User Manual

CONTACT US AT www.DRpower.com 9
OFF
Specifications
XD26
XD30
Engine
Honda 10.2 HP
Kawasaki 18.5 HP
Fuel Capacity
2.2 Quarts
2 Gal. (7.57 L)
Oil Capacity
38.4 oz.
57.6 oz.
Cutting Capacity
4' Tall Grass
8' Tall Brush
2" Thick Saplings
6' Tall Grass
8' Tall Brush
3" Thick Saplings
Cutting Width
26"
30"
Cutting Height
4"
4"
Drive/Steering System
Dual Hydrostatic Transmissions
Dual Hydrostatic Transmissions
Speeds
Infinite Variable Speed
0-3.2MPH Forward
0-1.9MPH Reverse
Infinite Variable Speed
0-3.2MPH Forward
0-1.9MPH Reverse
Torque
Up to 100 lb-ft
Up to 100 lb-ft
Shaft
.75″ Diameter, Keyed
.75″ Diameter, Keyed
Maintenance
None
None
Weight
18 lbs per Transaxle
18 lbs per Transaxle
Steering
X-Drive Power Steering
X-Drive Power Steering
Tires
16X6.5, All Terrain
Sealant Filled
16X6.5, All Terrain
Sealant Filled
Machine Dimensions
74″ L, 30″ W, 42″ H
76″ L, 34″ W, 42″ H
Machine Weight
313 lbs.
379 lbs.
Installing the Spark Arrestor (XD30 Only)
Note: The XD26 Honda model is shipped with the Spark Arrestor already installed.
There is a Tube, Screen, and Clamp included in the Spark Arrestor Kit (Figure 3).
The Kit is shipped in the Product Package. The Instructions included in the Kit
are not used this application.
Tools and Needed:
 3/8″ Wrench
 1/2″ Wrench
1. Remove the Spark Arrestor Parts from the Product Package (Figure 3).
2. Remove the four Bolts (two on each side) securing the Muffler Guard using
a 3/8″ Wrench (Figure 4).
Muffler
Guard
Figure 4
Bolts
Screen
Figure 3
Tube
Clamp

DR XD30 Specifications

General

Brand	DR
Model	XD30
Category	Lawn Mower
Language	English