Benefits
02 | Dräger Aerotest
®
Simultan HP
Monitored breathing air
By using the Dräger Aerotest Simultan HP, the quality of the breathing air from a compressor or a compressed
air cylinder can be tested. The application of the test system ensures the reliable testing in accordance with the
CGA G-7.1-2018 document. The Aerotest product family is based on the well known Dräger-Tubes
®
– a reliable
and quick test method to detect and measure possible toxic gases. The Dräger Aerotest Simultan HP enables
the quantitative detection of various potentially harmful substances, e.g. carbon monoxide, carbon dioxide,
water vapor and oil in compressed air. The concentrations of the contaminants may be determined individually
or simultaneously.
The Dräger Oil Impactor
The Dräger Oil Impactor is especially designed to detect oil aerosols in compressed air. It is a system that,
besides measurements of normal oils, enables the measurement of synthetic oils independent of the oil type
and viscosity. Quantitative results are easily visible via a tiered structure on the oil impactor.
Fast and simple application
The Aerotest can be connected via the CGA-347 adapter to the high pressure air system, without tools, simply
hand tightening. Measurement results are achieved within 5 to 10 minutes.
Always ready for use
All components of the Dräger Aerotest Simultan HP are arranged in a carrying case and therefore always ready
for use.
To Next Page
Loading...
Need help?
General
