40 Supplement | Atlan A300, A350 ceiling-mounted versions and wall-mounted version
Wall-mounted version
7. Push the device toward the wall mount until it touches the wall mount.
Pay attention to the following:
– The mount on the device is properly aligned above the trunnions of the lifting
unit.
– The rear of the device, hoses and cables are in perfect condition.
– Cables and central supply hoses are not jammed.
– The ventilation slots on the wall mount are not covered.
Engage the brakes on the service cart.
8. Using the crank handle (7), move the lifting unit upward.
During the upward movement of the lifting unit, make sure that the mount on
the device is aligned above the trunnions (8) on the lifting unit.
4373343729
To Next Page
Loading...
