Page | 11
BiliLux LED Phototherapy Light
o Press the key on the control panel to turn on the
phototherapy light.
o The LED indicators also turn on to indicate irradiance intensity
o Adjust the irradiance to the desired level using the
o Intensity keys on the control panel.
o The LED indicators above the key turn off/on in succession each
time the key is pressed.
o The available settings are
20%, 40%, 60%, 80%, and 100%.
Therapy will continue until one of the following occurs:
o Therapy is paused or ended by the user.
o The device is turned off via the on/off switch.
o The device loses power.
2
1
To Next Page
