Operation
98
Operating Instructions Caleo, Software 2.n
Selecting Menus
– The trend graph for the selected measured value is
displayed on screen.
Default measured value:
The selected value is displayed as a trend graph.
In this graph, the trend curve of the measured value is overlaid
on the corresponding setpoint curve.
Time cursor:
The time cursor is displayed as a vertical dotted line marking a
precise point of time on the graph's time axis.
z Turn rotary knob to move the time curve on the time scale.
The point in time marked by the cursor line is specified under-
neath the dotted line with date and time. Start and end time for
the current time window are specified underneath the trend
graph to the right and left, respectively.
If the time cursor is moved beyond the displayed time range,
the screen adapts automatically and displays the new time
range:
z Turn rotary knob counterclockwise to display a less recent
time range.
z Turn rotary knob clockwise for a more recent time range.
Data window:
The time cursor is associated with a data window situated to
the right of the displayed trend. This data window shows the
numerical values pertaining to the time marked by the time
cursor.
The following values are displayed in the data window:
1 Name of the selected parameter
2 Set value of this parameter at the marked time
3 Measured value of the parameter at the marked time
trend 1 Skin temperature
trend 2 Air temperature
zoom 3 hours
To Next Page
Loading...
