476 Issue date: 17 November 2006 31 of 80
14.69 Place the ‘D’ ring over the male part of the press stud.
14.70 Place two fingers under the shoulder strap press stud and
use your thumb on top to create a ‘depression’ or use work
surface.
14.71 Offer-up the female part of the press-stud to the male part
on the shoulder strap of the BA set ensuring that the
connection starts from the opposite side of the ‘spot’ side
(see image 684768 above right) identified on the surface of
the female part of the press stud.
14.72 Complete the connection by moving thumb across the
press stud.
To Next Page
Loading...
