Why Dräger Movita Medical Equipment lift system does not respond when actuated?
If the lift system of your Dräger Medical Equipment isn't responding, the system may be without power or the cable connection may be interrupted. You should check the power supply and fuses (hospital maintenance).
What to do if Dräger Movita Medical Equipment has insufficient gas supply and a hissing sound?
If you hear a hissing sound and suspect an insufficient gas supply in your Dräger Medical Equipment, it may be that pressurized gas is escaping from inside the ceiling supply unit. Notify hospital maintenance or DrägerService to check the gas supply, considering also connected devices.
What to do if the pneumatic brake does not release on Dräger Medical Equipment?
If the pneumatic brake on your Dräger Medical Equipment isn't releasing, it could be due to a non-working pneumatic valve or brake key (no hissing sound when actuated). Check the compressed air system. If the compressed air system is in order, inform DrägerService.
Why is the LED indicator not lit green on Dräger Movita lift system?
If the LED indicator on your Dräger Medical Equipment lift system is not lit green, the board/system may be without power, or the cable connection may be interrupted. Check the power supply and fuses (hospital maintenance).
What to do if the electromagnetic brake does not release on Dräger Movita?
If the electromagnetic brake on your Dräger Medical Equipment does not release, it could be that the electromagnet or key is not working. Inform DrägerService.
Why electromagnetic brake does not engage on Dräger Movita?
If the electromagnetic brake on your Dräger Medical Equipment does not engage, it may be that the electromagnet is not supplied with current. Inform DrägerService.
Why Dräger Movita Medical Equipment makes a continuous hissing sound?
If your Dräger Medical Equipment is making a continuous hissing sound, it may be due to defective pneumatic connections. Inform DrägerService.
What to do if Dräger Movita Medical Equipment lift system does not respond to the down arrow key?
If the lift system on your Dräger Medical Equipment does not respond when you press the down arrow key, it's possible that the Perseus safety sensor has been triggered. Remove any obstacle and then try operating the up arrow key.
What to do if bearing with friction brake turns too easily or stiffly on Dräger Movita?
If the bearing with friction brake on your Dräger Medical Equipment turns too easily or stiffly, it may be that the friction brake is adjusted too loose or tight. Inform DrägerService.
What to do if bearing with pneumatic brake or electromagnetic brake turns too stiffly on Dräger Movita Medical Equipment?
If the bearing with pneumatic brake or electromagnetic brake on your Dräger Medical Equipment turns too stiffly, it may be that the friction brake is adjusted too loose or tight. Inform DrägerService.
Essential safety instructions for general operation, including intended use and service.
Highlights critical warnings regarding personal injury, equipment damage, and specific module installation.
Provides warnings and instructions for safe positioning and connection of devices.
Instructions for connecting power, medical gas probes, and AGSS/AIR motor probes.
Covers touch voltages, personal injury risks, fire hazards, and control panel blocking.
Instructions for releasing brakes and positioning arm systems.
Guides for positioning single-arm and double-arm units, including light integration.
Step-by-step guide for moving the media column/head upwards and downwards.
Step-by-step guides for docking and undocking MOVA lift equipment carts.
Instructions for manual system operation during power failure.
Specifies maximum load on support arms with mounting rails for GH3/GH3+ lifting modules.
Table of maximum loads for Movita arm systems (light, medium, strong) by length.
General| Brand | Dräger |
|---|---|
| Model | Movita |
| Category | Medical Equipment |
| Language | English |
To Next Page