Need help?Do you have a question about the Dräger Pac 8000 and is the answer not in the manual?
General| Ingress Protection | IP68 |
|---|---|
| Display | Backlit LCD |
| Dimensions | 64 x 84 x 20 mm |
| Weight | 106 g |
| Target Gas | CO, H2S, O2, SO2 |
| Sensor Type | Electrochemical |
| Alarm | Audible, visual, and vibration alarms |
| Data Logging | Yes |
General safety advice before using the product and handling calibration.
Guidelines for using the device in potentially explosive atmospheres and handling electrostatic charges.
Steps for initial start-up, switching the device on/off, and pre-use checks.
Covers activating/opening quick menu, bump tests, and information/error displays.
Explains how to display and interpret error and warning codes.
Procedure for performing a fresh air calibration to ensure accuracy.
Detailed steps for performing a span calibration with test gas.
Instructions and safety warnings for replacing the device sensor.
Step-by-step guide for safely replacing the device battery.
To Next Page