Dräger Polytron 5000

WARNING
Strictly follow the Instructions for Use.
The user must fully understand and strictly observe the
instructions. Use the product only for the purposes specified
in the Intended use section of this document.
!
i
Dräger Polytron 5000
Instructions for Use
Downloaded from Arrow.com.

Dräger Polytron 5000 Specifications

General

Type	Gas Detector
Housing Material	Aluminum or Stainless Steel
Detection Principle	Electrochemical sensor
Gases Detected	Oxygen, Toxic and Combustible gases
Display	Backlit LCD
Output Signal	4 to 20 mA, HART
Operating Temperature	-40 °C to +65 °C (depending on the sensor)
Ingress Protection	IP66
Approvals	ATEX, IECEx
Humidity	0 to 95% RH, non-condensing

Summary

For Your Safety

General Safety Statements

Essential safety precautions and guidelines for operating the instrument safely.

Definition of Alert Icons

Operation and Menu System

Device and Sensor Installation

Covers physical installation of the device and sensor, including wiring and mounting.

Menu Navigation and Interaction

Details how to navigate the menu, change values, and interact with the device using the magnetic wand.

Menu Item Functions

Explains key menu options like Sensor Lock, Gas Conc, Password, Zero/Span Adjustments, and Cal Sig.

Maintenance and Troubleshooting

Zero and Span Calibration (Toxic Gases)

Span Calibration (Oxygen)

Error Message Handling

Lists error codes, their causes, and recommended solutions for troubleshooting device issues.

Disposal of Electrical and Electronic Equipment

Technical Data and Specifications