What to do if Dräger Medical Equipment displays 'Change operator password: 2nd new password is 1st new password'?
If the Dräger Medical Equipment displays the message 'Change operator password: 2nd new password is 1st new password' (error 22053), enter the correct new password.
What to do if Dräger DrugTest 5000 display 'Close door' message?
If your Dräger Measuring Instruments are beeping and showing the message 'Close door', it means that the analyzer door was opened during analysis. Make sure to close the analyzer door.
What to do if my Dräger Measuring Instruments emit smoke or a pungent smell?
If you notice smoke or a pungent smell from your Dräger Measuring Instruments, it might be due to using the wrong battery charging power supply unit. Ensure you are using the supplied battery charging power supply unit. If the issue continues, contact Dräger.
Why Dräger DrugTest 5000 Measuring Instruments screen is not displaying anything?
If the screen on your Dräger Measuring Instruments doesn't turn on within 10 seconds of switching it on, it could be because the battery is discharged and no external power supply is connected. Connect the battery charging power supply unit and ensure it's connected to a mains power supply.
What to do if Dräger Medical Equipment shows 'Battery charge is too low'?
If the Dräger Medical Equipment displays the message 'Battery charge is too low' (errors 10800, 10801, 10802, 10803, 10804, 10805, 10806), the solution is to charge the battery. If the error persists after charging, it may indicate that a new battery is required.
What to do if Dräger Medical Equipment displays 'New operator: operator list full'?
If the Dräger Medical Equipment displays the message 'New operator: operator list full' (error 22040), delete one operator.
What to do if Dräger Medical Equipment displays 'Printer paper is missing or printer flap open'?
If the Dräger Medical Equipment displays the message 'Printer paper is missing or printer flap open' (error 21200), check the paper and printer cap.
What to do if Dräger Medical Equipment displays 'Communication error (no printer found)'?
If the Dräger Medical Equipment displays the message 'Communication error (no printer found)' (error 21201): 1. Switch on the printer. 2. Re-check the positioning of the printer. If the error persists, service is required.
What to do if Dräger Medical Equipment displays 'Entered date is not plausible'?
If the Dräger Medical Equipment displays the message 'Enter date is not plausible' (error 20002), enter the correct date.
What should I do if Dräger Medical Equipment says 'QA Check expired'?
If the Dräger Medical Equipment displays the message 'QA Check expired' (error 22001), run a QA-Test.
General| Sample Type | Oral fluid |
|---|---|
| Display | LCD |
| Operating Temperature | 5 to 40 °C |
| Storage Temperature | -20 to 60 °C |
| Detectable Drugs | Cocaine, Opiates, Amphetamine, Methamphetamine, Benzodiazepines, THC |
| Battery Life | Up to 8 hours |
| Detection Time | 5–10 minutes |
Provides essential safety precautions for using the product.
Explains the meaning of alert icons used in the document.
Provides a general overview of the Analyzer's structure and appearance.
Details the specific parts and physical elements of the Analyzer unit.
Describes the layout and elements shown on the Analyzer's display.
Lists all components supplied with the Dräger DrugTest 5000 Analyzer.
Lists essential items that must be provided separately for operation.
Lists optional accessories available to enhance the Analyzer's functionality.
Explains the core functionalities and operational characteristics of the Analyzer.
Defines the specific purpose, application, and scope of the test system.
Clarifies the meaning of various symbols used throughout the manual for user guidance.
Guides users on how to navigate through the Analyzer's menu system using the unit keys.
Describes how to adjust Analyzer settings, often via PC connection.
Outlines the necessary conditions and checks before operating the Analyzer.
Details the steps for preparing the Analyzer before commencing sample analysis.
Provides instructions on how to power on the Analyzer and initiate the self-test.
Explains the procedure for collecting a biological sample using the test kit.
Details the step-by-step process for inserting the cassette and analyzing the sample.
Optional step for entering user and subject information before or after analysis.
Describes actions to take after the analysis is complete, including result viewing.
Provides instructions on how to safely power off the Analyzer.
Explains the different operational states of the Analyzer, such as Ready and Standby.
Explains the Analyzer's automatic power-off feature and potential causes.
Describes how to interpret the battery charge indicator symbols for portable operation.
Details battery status interpretation when the Analyzer is connected to mains power.
Details battery status interpretation when the Analyzer is operating on battery power.
Outlines the basic maintenance requirements and recommendations for the Analyzer.
Provides guidelines for cleaning the external surfaces of the Analyzer safely.
Offers recommendations for optimal battery care and maximizing its lifespan.
Provides instructions for the proper and environmentally sound disposal of the product.
To Next Page
