Dräger Primus Disassembly/Assembly

Immersion Disinfection:
Please use the dis infectants listed in the operating instructions
for Dräger flow sensors.
Machine cleaning and disinfection:
Position components so that all interior spaces and surfaces
are completely flushed and water can drain off freely.
Sterilization:
SpiroLife® flow sensors are not suitable for plasma or
radiation sterilisation.
Visual check
Manual cleaning
and disinfection
Machine cleaning
and disinfection
Sterilization
D-39523-2015
Primus® Family*
Breathing System
Reprocessing Instructions
This guideline does not replace the instruction for use.

Dräger Primus Specifications

General

Type	Anesthesia Workstation
Oxygen Flush	Yes
Ventilation Modes	Pressure Support
Gas Supply	O2, Air, N2O
Vaporizers	Isoflurane, Sevoflurane, Halothane
Patient Monitoring	Airway Pressure
Backup Battery	Yes
Alarms	Apnea, Gas supply failure
Power Supply	AC Mains, Battery Backup