Do you have a question about the Dräger Primus Series and is the answer not in the manual?
Type | Anesthesia Workstation |
---|---|
Display | Color Touchscreen |
Power Supply | AC Mains (100-240V, 50/60Hz) |
Backup Battery | Minimum 30 minutes (depending on configuration and usage) |
Tidal Volume Range | 20 to 1500 mL |
Respiratory Rate | 4 to 100 bpm |
Inspiratory Time | 0.2-5.0 sec |
PEEP | 0-20 mbar |
Gas Supply | O2, N2O, Air |
Alarms | Apnea, Gas Supply |
Ventilation Modes | Manual, Pressure Support, SIMV |
O2 Flush | 35 to 45 L/min |
Guides through powering on, setting valves, confirming checklist, and system tests.
Instructions for running self-test, understanding system leaks, compliance, and causes of leakage.
Instructions on how to display and set alarm limits using the rotary control.
Steps for releasing oxygen safety control, manual ventilation, and starting device in emergencies.
Describes 'POWER FAIL' message, battery operation, and manual ventilation during power loss.
Explains messages like 'No N₂O, O₂ or AIR DELIVERY' and backup gas usage.
Details 'VENTILATOR FAIL' error, unaffected functions, and automatic switch to Man. Spont.
Describes 'GAS MIXER FAIL' message and continued ventilation/monitoring functionality.