Need help?Do you have a question about the Dräger Primus and is the answer not in the manual?
General| Type | Anesthesia Workstation |
|---|---|
| Oxygen Flush | Yes |
| Ventilation Modes | Pressure Support |
| Gas Supply | O2, Air, N2O |
| Vaporizers | Isoflurane, Sevoflurane, Halothane |
| Patient Monitoring | Airway Pressure |
| Backup Battery | Yes |
| Alarms | Apnea, Gas supply failure |
| Power Supply | AC Mains, Battery Backup |
Essential guidelines for safe operation and patient care.
Emphasizes adherence to the manual for correct operation.
Instructions for charging the internal UPS battery.
Steps to connect the workstation to medical gas sources.
Steps for connecting the workstation to electrical power.
Procedure for verifying workstation readiness before operation.
Steps to switch on the workstation and initial boot process.
Detailed explanation of the automated internal tests.
How the workstation checks system performance and leaks.
Procedure for initiating operation in emergency situations.
How to perform ventilation manually using the device.
Description of automated ventilation modes.
How ventilation synchronizes with patient effort for volume delivery.
Ventilation synchronized with patient effort and pressure support.
Ventilation controlled by pressure settings.
Pressure-controlled ventilation synchronized with patient effort.
Pressure-controlled ventilation synchronized with pressure support.
Mode for patients breathing spontaneously with pressure assistance.
How to perform a test to check for leaks in the breathing system.
Steps to safely shut down the workstation.
How to measure blood oxygen saturation.
Explanation of alarm colors, sounds, and urgency.
Procedures for temporarily muting or disabling alarms.
Table showing alarm status across different modes.
How to enable or disable carbon dioxide monitoring alarms.
How to view and adjust the thresholds for alarms.
To Next Page
