Dräger Primus - SpO2 measurement (optional)

SpO2 measurement (optional)
Selecting a sensor
Only Nellcor sensors may be used (see separate order list/list
of accessories).
The new Oximax modules implemented in Primus are only
compatible with the new Oximax sensors (purple probe or
white probe for MAX FAST).
Only the DEC-8 or DEC-4 extension lead (purple plug
connector) may be used.
The new sensors are downward-compatible with all modules
already used in the field in older Drager machines.
Note the Instructions for Use of the sensors — incorrect
positioning or use may Cause injuries.
@ Select a sensor in accordance with the following criteria:
— Weight of the patient
— Mobility of the patient
— Possible application point
— Perfusion of the patient
— Duration of use
The following table provides a guideline for selecting specific
sensor, shown here with their characteristic values.
Monitoring
Sensortyp OXIMAXTM OXIMAXTM OXIMAX™ DURASENSOR™ | OXIMAX™ OXIMAX™ OXIMAX™
MAX N MAX | MAX P DS-100 A MAX A MAX R MAX FAST
Age group Neonates/ Infants Children Adults Adults Adults Adults
Adults
Weight <3 kg to 1 to 20 kg 10to50kg |>40 kg >30 kg >50 kg >40 kg
ofthe patient |>40 kg
Duration Short and Short and Short and Short-term Short and Short and Short and
of use long-term long-term long-term monitoring longterm longterm long-term
monitoring monitoring monitoring monitoring monitoring monitoring
Mobility Limited Limited Limited Inactive patients {Limited activity inactive Limited
of the patient | activity activity activity only patients only, jactivity
must be
checked at
least every 8
hours
Preferred Ball of the Toe Finger Finger Finger Nose Forehead
measuring foot
point
Sterility Sterile Sterile Sterile |------- Sterile Sterile Sterile
packaging packaging packaging packaging packaging packaging
1) In unopened and undamaged packaging
DURASENSOR™ and OXIMAX™ are registered trademarks.
Instructions for Use Primus SW 2.n 89